\ n 1.inside é composto de tubo de titânio que tem forte anti-corrosão, a pressão da água é de cerca de 3.5Mpa \ n 2.out é composta de casca de PVC cuja temperatura é de 45 ° C e a pressão da água é de cerca de 0,4 Mpa \ n 3.este produto é usado para piscina, aquário para piscina de peixes e assim por diante. \ N
Product detail |
inside: Gr1seamless titanium coil |
titanium tube material |
seamless tube |
titanium tube diameter |
12.7mm----30mm(normal use) |
titanium tube thickness |
0.55mm----3.0mm(normal use) |
outside shell: PVC case |
PVC cover material |
enviromental protection |
PVC tube diameter |
OD110mm----OD400mm |
PVC tube thickness |
2.7mm----15.3mm |
connection |
gas inlet and outlet |
titanium thread and copper nut/tube |
water inlet and outlet |
plastic piston |
testing/others |
water pressure |
0.25----1.0Mpa(2.5---10bar) |
gas pressure |
3.5Mpa |
PVC temperature |
≤45°C |
shell leakage |
no |
tube leakage |
no |
pack |
0.6mm thick gray sponge |
corrosive or not |
anti-corrosion |
use |
pool /heat pump/ air conditioner/chillar etc |
\ n \ n Nossos dados técnicos normais para sua referência \ n \ n \ n Especificações \ n \ n 1-10HP disponíveis ou mais capacidade \ n \ n
Model |
Heating power
(kw)
|
Tubing length
(m)
|
PVC shell size
(mm)
|
Refrigerant in & outlet
(mm)
|
Water in & outlet
(mm)
|
NTTP038-B1 |
3.8 |
3 |
Φ160*330 |
Φ12.7mm |
50mm |
NTTP045-B1 |
4.5 |
4 |
Φ160*330 |
Φ12.7mm |
50mm |
NTTP053-B1 |
53 |
5 |
Φ160*330 |
Φ12.7mm |
50mm |
NTTP078-B1 |
78 |
6 |
Φ160*330 |
Φ12.7mm |
50mm |
NTTP095-B1 |
95 |
7 |
Φ200*500 |
Φ12.7mm |
50mm |
NTTP113-B1 |
11.3 |
8 |
Φ200*500 |
Φ12.7mm |
50mm |
NTTP125-B1 |
12.5 |
9 |
Φ200*500 |
Φ12.7mm |
50mm |
NTTP140-B1 |
14 |
9.5 |
Φ200*500 |
Φ12.7mm |
50mm |
NTTP170-B1 |
17 |
10.3 |
Φ200*500 |
Φ12.7mm |
50mm |
NTTP210-B1 |
21 |
11.5 |
Φ200*500 |
Φ12.7mm |
50mm |
NTTP260-B1 |
26 |
14 |
Φ200*500 |
Φ12.7mm |
50mm |
Nota: 1hp = 1Ton = 3,5 kilowatt = 12,000 btu \ n 1inch = 25,4mm, 1000mm = 1m \ n \ n
|
Refrigerant side(Inside titanium) |
Water side(Inside PVC shell) |
Max working pressure |
4.5 Mpa |
0.6-1.2 Mpa |
Working temperature |
-50-150 degree C |
0-45 degree C |
Suitable media |
R22,R407c,R134a,R404a,R410a,R610a,etc |
Fresh water,sea water,antifreeze and so on |
Attention |
- Please discharge water to avoid breaking PVC shell when temperature below zone.
- For the first time using,please make sure water were discharge and water pressure will not over the max working pressure.
- Please keep water clean,install a filter and clean regularly.
|
Nota: 1 Mpa = 145 psi = 10 kg \ n \ n Vantagens dos materiais de titânio
Six Characters of Titanium |
1. High Strength |
Titanium strength/density ratio is better than other metals, components with high strength, good rigity, less weight can be made out of titanium. Titanium is applied for aircrafts engines, frames, skins, fastners and landing gears. |
2. Anti-Corrosion |
Compared with stainless steel, titanium alloy's corrosion is better in moisture laden air, seawater, titanium greatly resists spot corrosion, acid corrosion and stress corrosion. Titanium resists corrosions to alkali, chloride, chlorinated organic sunstances, sulphuric acid, nitric acid. |
3. High-Temperature Resistance |
Titanium application temperature's higher than aluminium alloys. Titanium can work in 450-500℃ for long time. Titanium alloy stil prossesses high strength when working in 150-500℃. Titanium working temperature can be reached to 500℃ |
4. Low Temperature Resistance |
Titanium alloys still owns its mechanical properties when working in low or super low temperature conditions. Titanium alloys with low-temperature resisitance and extra low interstitial still possess good ductility, therefore, titanium alloy is sort of good low temperature structural material. |
5. Eco-Friendly Metal |
Thermal conductivity of titanium is lower than carbon steel or copper, but titanium owns very good corrosion resistance, therefore, titanium thickness can be greatly reduced, also the heat exchange mode is dropwise condensation between titanium and steam. This kind of mode reduces heat transfer resistance, no fouling on titanium surface, which makes titanium thermal conductivity better. |
6. Good Thermal Conductivity |
Titanium is non-magnetic metal, it can't be magnetized in large magnetic field, also titanium is toxic-free and compatibility with blood, there, titanium is applied in medical field. |
\ n \ n \ n Certificação \ n
\ n \ n Fico feliz em dizer que aderimos à Trade Assurance no Alibaba para proteger o seu pagamento para garantir que entregamos a tempo e fabricamos produtos de qualidade conforme necessário.
\ n nossa fábrica \ n
\ n \ n Contate-nos Contate-nos \ n Jane Yang \ SHAANXI YUNZHONG INDUSTRY DEVELOPMENT CO., LTD \ n ADICIONAR: No.128 Gaoxin Road, Baoji City, Província de Shaanxi \ n PC: 721013 \ n Skype: jane.yang ( AT) yunch.tech \ n TEL: + 86-917-3373399 \ n Fax: + 86-917-3373378 \ n Móvel: + 86-132-0189-8276 \ n E-mail: sales3 (AT) yunch.tech \ n Whats up: + 86-132-0189-8276 \ n Web: \ n
\ n \ n Produtos relacionados \ nPlaca / chapa de titânio: Gr1, Gr2, Gr3, Gr4, Gr5, GR7, Gr9, Gr11, Gr12, Gr23 \ n Barra / vareta de titânio: Gr1, Gr2, Gr3, Gr4, Gr5, GR7, Gr9, Gr11, Gr12, Gr23 \ n Fio de titânio: Gr1, Gr2, Gr3, Gr4, Gr5, GR7, Gr9, Gr11, Gr12, Gr23 \ n Tubo / tubo de titânio: Gr1, Gr2, Gr3, Gr4, Gr5, GR7, Gr9, Gr11, Gr12, Gr23 \ n Alvo de titânio: mais de 99,6% de titânio, forma: alvo redondo e alvo de placa \ n Titânio de fixação \ n Ânodo de titânio \ n Flange de titânio, anel de titânio, disco de titânio etc. Níquel e níquel ligas de titânio: Chapa, haste, fio, tubo \ n Tungstênio: W1, W2. 99.95%, 99.995%, Placa, vareta, fio, tubo \ n Molibdénio: 99.95%, 99.995%, Placa, vareta, fio, tubo \ n Zircónio: Placa, vareta, fio, tubo \ n Tântalo: Chapa, haste, arame , tubo \ n Nióbio: placa, haste, fio, tubo \ n FALE CONOSCO \ n \ n
Grupo de Produto : Produto Titanium > Tubo de titânio